Fluke 1750-TF Three-Phase Power Quality Recorder, 4 iFlex Probes
SKU 00000984562
$0.00
1
Product Details
This model includes 4 x 1,000A 3210-PR- TF iFlex flexible current probes.
Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
Quick and reliable configuration: Android based Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software - no need to worry about missed information due to incorrect setups
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance
Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
Measure every parameter: Voltage and current on three phases, neutral, and ground
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument
The Fluke 1750-TF Power Recorder is a comprehensive yet easy to use system for power quality investigations. The 1750-TF Power Recorder, consists of a power recorder instrument, a wireless handheld Personal Digital Assistant (PDA) for control and setup, and a powerful yet easy to use PC application, Power Analyze. Four iFlex current probes are provided as standard equipment. A wide range of flexible and clamp-on current probes are available from Fluke.
Key features of the 1750 Power Recorder are: No PC needed for setup Using the included a wireless-enabled Personal Digital Assistant (PDA) as a controller, you do not need a PC to configure the Recorder, troubleshoot connections, preview data, or download the recorded data. Downloaded data goes onto the SD memory card plugged into the 1750, not directly to the PDA. The range of the PDA with the wireless link is about 15 meters (45 feet) from the 1750-TF. Simplified test lead connections to the power network allows you to simply connect a voltage probe to a conductor on each phase that you want to record.
On the current inputs, the 1750 TF automatically identifies what type of probe is connected. It then configures its measurement system appropriately for the model of current probe you are using. Connection diagrams for the supported power network configurations (delta, Wye, and others) appear on the handheld PDA controller. Once you make connections, you can view live readings and a phasor diagram on the PDA to confirm the connections. If a phase channel is wired incorrectly, you can swap the phase to another channel by changing an internal Recorder setting using the PDA, and then reconfirm correct readings.
Internal Uninterruptible Power Supply (UPS) An internal NiMH (Nickel-Metal-Hydride) battery pack and charging system maintain data capture continuity through power interruptions of 5 minutes or less. The Recorder uses an automatic, self-learning threshold routine, which means you do not have to set any event threshold limits before you start recording. You can detect and display power quality events (disturbances) using the Power Analyze software on a PC after the event has been captured.
Included Accessories
1 - 1750 handheld tablet
4 - 1,000A 3210-PR-TF iFlex flexible current probes
5 - Test leads and clips
1 - SD memory card
1 - Fluke Power View and Fluke Power Analyze software
